JSP Evo3 Safety Helmet - Slip Ratchet

Personalised - Safety Helmet JSP Evo 3 with Slip Ratchet

This personalised - Safety Helmet JSP Evo 3 with Slip Ratchet can be direct embossed same day with UV inks to the front or sides and rear of the helmet (not vinyl stickers) they need to be ordered in multiples of 20 of the same print colour and same helmet colour with a minimum order qty of just 20 helmets.e.g. 20, 40,60 etc. Print your logo to the front, back or sides of this helmet!

Printing with our UV method that will add a protective over layer of clear gloss over the UV inks to add further protection and slight raised print like the image toward the top of the page or more samples can be seen here. See more info regards our helmets printing and samples here.

 You can design your own helmet online using our product designer tool, or if you aren't confident doing so you can send us an email to sales@hivis.co.uk.
Add your logo or logos to the helmet and see the price change depending on how many logos and how many colours you choose to have the logo printed to your helmet.

What colour safety helmet should you wear on site ?
Build UK have devised a safety helmet colour code that some sites make use of which is. 
White helmet for Site Managers, Competent Operatives, or Vehicle Marshals
Orange helmet for slinger or signaller
Black helmet for Supervisors
Blue helmet for all other site workers 
It is important to realise that this isn't a legal requirement, though more and more sites are adopting this colour code for safety helmets use on sites.

This JSP helmet is made from HDPE materials and is treated to accept inks for the logo that can be screen or pad printed to the front, side or even rear of the helmet. Just upload your logo and choose how many colours from the drop down, you would like us to print, depending on how many colours are in the logo the cost rises the more colours printed.

Add a personal touch to your hard hats with our custom logo printed safety helmet. We offer a fantastic ink print service to our safety helmets, whereby your company's logo can be printed on to the front, back or sides of the helmet. If you require print logo on the sides or rear of the helmet please call or email us.

These printed safety helmets come in a variety of colours (i.e. white, red, pink, blue, orange, green, and yellow). Simply select the colour you need, upload your logo, and we will send a print proof of your personalised hard hats for approval within 48 hours. The size of the print area on this safety helmet is 80x35mm (sides of the helmet will be slightly smaller print area) and delivery is usually less than 2 weeks for direct print at manufacture.

Why have we chose this JSP Safety helmet for custom printed personalised logos ? Simple really , you see not all safety helmets can be personalised, more specifically cheaper hdpe ones dont have the right coating to allow the inks in your custom logo to bond for a good print. Choosing this JSP safety helmet to add your custom logo ensures the best quality helmets and good logo printing.

Although they are personalised, our custom hard hats do not compromise on safety €“ your logo is printed directly onto the safety helmet using ink and you can select a maximum of 6 different ink colours (cost increases with each). Each helmet features a 6-point poly harness, a precision 1,2,3 which is designed to be compatible with a range of JSP products. It also comes fitted with a sweatband.

A minimum of 20 custom hard hats all in the same colour can be ordered at any one time;(all the helmets must be the same colour and the all the prints colour must be the same) but if you require less than this, we also offer a safety helmet logo sticker service, which may be more suitable for your needs. Due to the personalised nature of our printed hard hats, please allow two weeks for them to be printed.
 

See the chart below for the logo sizes to this personalised safety helmet.

Tough HDPE shell
In tests the EVO®3 proved far tougher than the EN397 standard required and far tougher than any of it's competitors.

Supreme Comfort
A 6-point terylene cradle harness system offers unrivalled comfort without compromising performance.

Chamlon„¢ Sweatband
Egyptian cotton core with porous PU coating for maximum sweat absorption. PH neutral, dermatologically tested.

3D-Adjustment harness system
Never before has such a precise fit been attainable on an industrial safety helmet, using the unique 1-2-3 point harness depth settings.

Adjustment
OneTouch„¢ Slip Ratchet.

EVOSpec®
The helmet with integral visor ensures that eye protection is on hand when needed and never lost, whilst removing the need for additional eye protection. Protects to EN 166.1.F

Universal Slots
Enables firm fitting of a range of Surefit„¢ safety visors and ear defenders.
 

*Please note uploaded images are not to exact scale, we will use our years of judgment to ensure the optimum size fits the product ordered.*